Add a till using Vektori Kassa and change its settings in Vektori Cloud. From the same view, you can enable real-time product updates, updates to parked sales and a till-specific QR code for the receipt.
Vektori Pilvi → Settings → Till → Tills
Here, a till means a device using Vektori Kassa. Payment terminal settings, on the other hand, concern accepting card payments.
Adding a till
Adding a new till may affect licence fees, which are determined by the number of active tills. First, check whether the till you want to use is already listed.
You can add a till either in the Vektori Kassa application or in the till management section in the cloud. Choose the method that suits your situation.
Option 1: add a till in the application
- Install the Vektori Kassa application on a compatible Android or iPad device.
- Open the application and proceed through the setup until you reach till selection. See the login steps in Logging in to Vektori Kassa.
- Select Create new and create a till according to the application's instructions.
- Check the till details in the cloud under Vektori Pilvi → Settings → Till → Tills and complete the required settings.
A till created in the application can be found in the till management section in the cloud. Complete the details for the same till there.
Option 2: add a till in the cloud
- Open Vektori Pilvi → Settings → Till → Tills.
- Select + New till.
- Give the till a recognisable Name, for example Store 1 – main till.
- Select the till's Location and Warehouse. Enter the serial number if necessary.
- Check the device and synchronisation settings described below.
- Select Save and check the till in the list.
Saving the till details in the cloud and logging in to the till application are separate steps. See also Logging in to Vektori Kassa.
Changing the settings of an existing till
- Open Vektori Pilvi → Settings → Till → Tills.
- Find the correct till. If necessary, check the location, model or serial number in addition to the name.
- Select the Edit pencil button on the left side of the row.
- Change the required settings and select Save.
- Open the till again and check that the changes were saved.
What do the settings define?
- Name: the recognisable name of the till in the till register.
- Location and Warehouse: the location and warehouse linked to the till.
- Printer type and Payment terminal type: selections for the devices in use. Also set up the device you use. The required instructions are at the end of this article.
- Use till-specific receipt header and footer: enables receipt texts specific to this till. Change the texts using the instructions in Changing receipt texts and the logo.
- Use till-specific QR code: adds a QR code for your own web address to the receipt. See Adding your own QR code to a receipt.
- WebSocket transmission: enables real-time updates for products and parked sales. The setup is described in the following section.
Enabling real-time synchronisation
Real-time synchronisation automatically transfers product changes and parked sales to the till. This means that a product price change can also be updated in an open sale. The function requires a working connection.
- Go to Vektori Pilvi → Settings → Till → Tills.
- Find the correct till and select the Edit pencil button on the left side of the row.
- Enable WebSocket transmission.
- Select Save.
The setting is till-specific. Check it for each till where you want to use real-time updates.
When does the setting take effect?
Restart the till application so that it fetches the new settings immediately. Alternatively, the till updates the settings automatically from the cloud over time.
Check the update at the till
Check the changed product and its price at the till before payment. If the product details are not updated automatically, select Functions → Update products at the till.
If you use parked sales on several tills, also make sure that the details of the correct sale are shown on the other till before payment. See Automatic updating of parked sales.
Adding your own QR code to a receipt
A till-specific QR code can direct the customer from the receipt to a web address of your choice. The customer can read the code with, for example, their phone's camera and open the link it contains. You can also define the heading shown above the code and the explanatory text shown below it.
Define the code content in the cloud
- Open Vektori Pilvi → Settings → Till → Tills and select Edit on the row of the correct till.
- Enable Use till-specific QR code.
- Enter the QR code heading, for example Leave feedback.
- Enter the QR code URL in full, for example https://www.company.co.uk/feedback. Use your company's actual address.
- Enter the QR code explanatory text, for example Scan the code and tell us about your experience.
- Select the QR code size and press Save.
Enable QR code printing at the till
- Restart the till application so that it fetches the settings saved in the cloud.
- At the till, open Functions → Settings → Receipt printer.
- Check that the receipt printer in use is selected. Enable Print QR code in the advanced settings.
- Print a test receipt. Check the heading and explanatory text and scan the QR code with a phone. Make sure it opens the page you intended.
If your own QR code is missing from the receipt, check both the till-specific QR setting in the cloud and the till's Print QR code selection. Printing your own QR code uses both settings.
Print Receipt Hero QR code is a separate setting related to the digital receipt. A QR code containing your own web address is defined using the settings above.
Instructions for locations and peripherals
- If the location you need is missing, see Locations.
- Selecting a printer in the till application: Setting up a receipt printer.
- Choosing the suitable instructions for setting up card payments: Payment terminal integrations – choosing the right instructions.
Comments
0 comments
Please sign in to leave a comment.