Use this guide to set up kitchen printing so that orders sent from the till are printed in the kitchen or, for example, at the bar. Setup is completed on the printer, in Vektori Cloud and on every till that uses the printer. The connection details required depend on the printer’s connection method; Sunmi Cloud also requires a cloud integration.
Cloud path: Vektori Cloud → Settings → Till → Kitchen printers.
Till path: Till → Functions → Settings → Kitchen printers.
In this guide
- 1. Prepare the kitchen printer and agree on the printing method
- 2. Configure the cloud integration if you use Sunmi Cloud
- 3. Add the kitchen printer to Vektori Cloud
- 4. Enable the kitchen printer on every till
- 5. Check that kitchen printing works
1. Prepare the kitchen printer and agree on the printing method
Before configuring the settings, find out which printer and connection method will be used to print kitchen orders.
- Printer and till: find out the printer’s exact model and the till device being used. Check with the equipment supplier that the setup is suitable for kitchen printing.
- Connection method: find out whether you are using a LAN/WiFi, USB, Bluetooth or Sunmi Cloud connection. A Sunmi brand alone does not mean that the printer uses a Sunmi Cloud connection. Ask the equipment supplier for the connection method and the information it requires if you do not know them.
- Prepare the device: set up the printer according to the manufacturer’s instructions, connect the power and load suitable paper. For LAN/WiFi printing, the till must be connected to the printer’s network. Sunmi Cloud requires a working internet connection.
- Products to print: decide the site and printing locations. Select which product groups are printed in the kitchen and which, for example, at the bar. Also agree whether products without a product group will be printed.
- Sending the order: agree whether orders are sent manually, when a sale is parked or when payment is made. Also decide whether only new lines are printed for an additional order.
2. Configure the cloud integration if you use Sunmi Cloud
Complete this step only for a Sunmi Cloud connection. If you use a LAN/WiFi, USB or Bluetooth connection, continue to section 3.
Cloud path: Vektori Cloud → Settings → Till → Printer integrations.
Make sure that the Sunmi Cloud printer has been prepared according to the equipment supplier’s instructions, has an internet connection and that you know its serial number. If the integration is already in use, check the current configuration before making changes: the same integration may serve other printers in the workspace.
- Open Printer integrations and find Sunmi Cloud printer.
- Enter the Address, Application ID and Application key provided for setup. Address refers to the address of the integration service. Ask the device or integration supplier for any missing information.
- Select Save and check the integration connection status.
Use this workspace’s integration details. Do not share the application key in a regular support message. Next, add the kitchen printer to the cloud with the type Sunmi Cloud and the device’s serial number.
3. Add the kitchen printer to Vektori Cloud
Cloud path: Vektori Cloud → Settings → Till → Kitchen printers.
- Select + Add printer.
- Enter an identifiable Name, such as Kitchen or Bar.
- Select the Type according to the connection method being used and complete its fields as instructed below.
- Select the correct Site.
- Select the Product groups whose products will be directed to this printer. If necessary, open the group tree and check the subgroups as well.
- Select Save. Reopen the saved printer and check the name, connection details, site and product groups.
Complete the fields for the selected connection method
The kitchen printer’s Type determines the connection details required. Complete the fields for the connection method being used:
- Sunmi Cloud: enter the device’s Serial number. Also make sure that the cloud integration in section 2 has been configured.
- ESC/POS LAN/WiFi: enter the Printer IP and Port. The default port is 9100; use the device’s actual configuration.
- ESC/POS USB: complete the USB identifier (VID:PID or path). Ask the person responsible for setting up the device for the correct identifier if you do not know it.
- ESC/POS Bluetooth: enter the Bluetooth address / MAC of the printer.
For ESC/POS options, you also specify the default paper width and command language. Select the width suitable for the device and either ESC/POS (general) or, for a compatible Star device, StarPRNT (Star). Till-specific settings can refine these defaults. Selecting the printer type alone does not guarantee device compatibility.
4. Enable the kitchen printer on every till
A kitchen printer added to the cloud must be enabled separately on every till from which orders are sent to it.
Till path: Till → Functions → Settings → Kitchen printers.
- Make sure that the till is in the correct workspace and site. If the new printer is not visible, select Functions → Update products.
- On the till, open Functions → Settings → Kitchen printers.
- Enable the desired printer using its switch.
- Open the printer’s Configure option. Check the connection details, paper width and command language according to the type being used.
- Check the printing options below according to the agreed operating method and save the configuration. Complete the setup on the other tills that use this printer as well.
Select how kitchen orders are printed on the till
Check the printer options and the till’s shared setting for printing when payment is made:
- Print only new lines: leaves out lines that have already been printed from the next printout.
- Print when parking: sends the relevant lines for printing when the sale is parked.
- Print products without a product group: determines whether products without a group are also printed.
- Print kitchen receipt when paying: the till’s shared setting for kitchen printing when payment is made.
- Print tabs on one receipt: select this according to the tab practice agreed at the workplace.
5. Check that kitchen printing works
Before using the system with customers, verify both the printer connection and that the order is printed at the agreed location. A test print alone does not confirm that the product groups or the order sending method are working.
First check the printer connection
On the till, open Functions → Settings → Kitchen printers → Configure for the correct printer. Use the Test print function if available. Check that the printout comes from the correct device, that the paper width is suitable and that the text is legible.
Then check that the order is printed
- On the till, add a product to the sale that belongs to a product group selected for the printer. If you use preparation instructions for products, also add product-specific line text.
- Send the kitchen receipt: tap the sales line and select Print → Print kitchen receipt.
- In the kitchen, check the products, quantities, any preparation instructions and that the order can be identified. Also check the line’s print indicator on the till. The indicator alone does not confirm that the paper has been printed.
- Add a new product and send the kitchen receipt again. If Print only new lines is enabled, the lines that have already been printed should be left out.
- Also verify printing when parking or paying if either method is used. Perform a payment test only according to the test procedure agreed by the company.
Setup has been verified when orders sent from the tills being used are printed at the correct location, the agreed products and information are included, and printing takes place using the selected sending method.
If the test print is unsuccessful or products or information are missing from the order, continue to the guide Kitchen printing does not work or information is missing from the printout. The guide helps narrow down issues with the connection, product groups and sending method.
Comments
0 comments
Please sign in to leave a comment.