Troubleshoot the connection between the Nets payment terminal and Vektori Kassa. These instructions apply to the Move 3500, iSMP4, Desk 3500 and Lane 3000 models that use a Nets Connect@Cloud connection. The checks are performed on the payment terminal and in the till application.
Start by checking the payment status if the problem occurred during payment. For other connection problems, proceed to checking the network connection.
First, check the status of an interrupted payment
If the payment terminal shows that the payment was successful but Vektori shows the sale as declined or interrupted, check the status of the original payment before charging for the same purchase again.
A till interruption entry, a restored connection or a restart indicates something different from the outcome of the card payment. Check the transaction using the instructions in Checking the till log, connection error and unclear payment.
If the status remains unclear, provide Vektori support with the receipt number or the time of the transaction, the amount and the till used. Nets transaction details may also be required for the investigation.
Check the payment terminal's network connection
- Check the connection type currently used by the device: Ethernet, Wi-Fi or, in a supported Move 3500 configuration, 4G.
- Check the network or Wi-Fi icon on the payment terminal. A green icon indicates a network connection. If the icon is red or white, check the connection.
- Check that the local network or Wi-Fi network you are using is working.
- If necessary, restart the payment terminal first and then the till. Check the connection status again.
Check the ECR connection to the Nets cloud service
The payment terminal transmits data to Vektori Kassa through the Nets Connect@Cloud service. A green ECR icon on the terminal indicates a connection to the service.
If the ECR icon is red or white, first check the network connection. Then check the Connect@Cloud settings below, or ask Nets payment terminal support to help check them.
Check the payment terminal's connection settings
You need a merchant card. The menu names may vary depending on the device software. Use the options for your model and connection type.
Network connection settings: merchant card → 6 → 1 → 2
- Komm. typ / Comm. type: the connection type in use. Desk 3500 and Lane 3000 use Ethernet. When Move 3500 and iSMP4 use Wi-Fi, select Wi-Fi. When Move 3500 uses the supported 4G connection, select GPRS.
- DHCP enabled: DHCP when the network assigns addresses automatically. When using a static IP address, follow the network administrator's specifications.
- Host IP address: 91.102.24.142.
- Host Port: 9681 in Finland.
The host address and port are described in the Nets firewall guide. If the firewall blocks the connection, ask the network administrator to check the settings.
Till connection settings: merchant card → 6 → 1 → 3
- Till: Yes.
- Komm. typ / Comm. type: select the connection type in use. The Connect@Cloud options for Move 3500 are Wi-Fi, Ethernet and GPRS. For Desk 3500 and Lane 3000, select Ethernet.
- ECR/TLS: Yes.
- ECR IP address: 3.33.230.243.
- Port: 6001.
Save with the green key and exit with the red key. Check the status of the ECR icon. The current settings are described in the Nets Connect@Cloud guide. Ask Nets to confirm the model-specific selections for iSMP4 if the device menu differs from the options described here.
If the GPRS option is missing from Move 3500
The Move 3500's 4G connection to the Connect@Cloud service is supported from Viking version 1.01.0 onwards. Ask Nets to confirm that your device supports 4G and which software is recommended. See Nets Viking 1.01.0 release information.
Software download is opened with the merchant card by selecting 8 → 1. Once Nets has confirmed that an update is required, start the download and wait for it to finish. After the restart, check the connection settings and the GPRS option. If the option is still missing, continue troubleshooting with Nets.
If the connection problem continues
Contact Vektori support if the payment terminal is online and the ECR connection is working but the till does not connect. Tell them the device model, connection type, error message and checks already performed.
Any reinstallation of the till application must be carried out according to the support instructions. After installation, reconnect the till to the company's cloud service. If the problem started during payment, first check the status of the original payment.
If the payment was made directly on the payment terminal
Check the payment transaction in Nets reporting and verify that the sale has been recorded in Vektori. A sale for a charge made manually on the payment terminal is recorded separately in Vektori. The steps for recording a confirmed charge that is missing from the till can be found in the unclear payment guide linked at the beginning of this article.
When using the terminal connected to the till, start payments from Vektori Kassa. If you need to use the terminal separately, ask Nets to confirm how your device is used and the relevant steps. Nets' device-specific user guides cover using the payment terminal on its own.
Contact Nets payment terminal support
Nets can help with the payment terminal's network connection, device settings and software. The telephone number is 010 80 40 40. Nets payment terminal support contact details.
Comments
0 comments
Please sign in to leave a comment.